PTFE High Temperature Tape with Adhesive Backing | 300°C Heat Resistant, 0.25mm x 13mm x 10m | Non Stick Thermal Tape for Vacuum Sealer Heating Strip, Insulation, Conveyor Guide

Specification

Item Type: PTFE Tape Roll

Material: PTFE

Specification:

Thickness: Approx. 0.25mm / 0.01in; Width: Approx. 13mm / 0.51in; Length: Approx. 10m / 32.8ft

Thickness: Approx. 0.25mm / 0.01in; Width: Approx. 19mm / 0.7in; Length: Approx. 10m / 32.8ft

Thickness: Approx. 0.25mm / 0.01in; Width: Approx. 25mm / 1in; Length: Approx. 10m / 32.8ft

Thickness: Approx. 0.25mm / 0.01in; Width: Approx. 50mm / 2in; Length: Approx. 10m / 32.8ft

Description: PTFE tape roll with adhesive backing. It is suitable for almost all vacuum sealing machines, as well as most types of hand/pulse heat sealing machines to replace deteriorated or burnt tape, which is an important barrier between the heating element and the bag. Old tape will cause poor sealing of the bag and may cause damage to the heating element and damage to the sealer. Just peel the tape from the roll and place it on the correct area (you need to clean the sticking position before placing the new tape). Above the wire of the vacuum sealing machine, below the wire of the pulse sealing machine

Package List

1 x PTFE Tape Roll